NSK Tapered Roller Bearings

Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one direction.

In the HR series, the rollers are increased in both size and number giving it an even higher load capacity. They are generally mounted in pairs in a manner similar to single-row angular contact ball bearings. In this case, the proper internal clearance can be obtained by adjusting the axial distance between the cones or cups of the two opposed bearings. Since they are separable, the cone assemblies and cups can be mounted independently.

Depending upon the contact angle, tapered roller bearings are divided into three types; Normal angle, medium angle, and steep angle.

Double-row and four-row tapered roller bearings are also available. Pressed steel cages are generally used.

Metric Design Tapered Roller Bearings For metric-design medium-angle and steep-angle tapered roller bearings, the respective contact angle symbol C or D is added after the bore number. For normal-angle tapered roller bearings, no contact angle symbol is used. Medium-angle tapered roller bearings are primarily used for the pinion shafts of differential gears of automobiles. Among those with high load capacity (HR series), some bearings have the basic number suffixed by J to conform to the specifications of ISO for the cup back face raceway diameter, cup width, and contact angle. Therefore, the cone assembly and cup of bearings with the same basic number suffixed by J are internationally interchangeable. Among metric-design tapered roller bearings specified by ISO 355, there are those having new dimensions that are different than the dimension series 3XX used in the past. Part of them are listed in the bearing tables. They conform to the specifications of ISO for the smaller end diameter of the cup and contact angle. The cone and cup assemblies are internationally interchangeable. The bearing number formulation, which is different than that for past metric design, is as follows:

Fig 1
Inch Design Tapered Roller Bearings Besides metric design tapered roller bearings, there are also inch design bearings. For the cone assemblies and cups of inch design bearings, except four-row tapered roller bearings, the bearing numbers are approximately formulated as follows:

Fig 2
Double-row Tapered Roller Bearings Design and Feadtured of Combinations of Tapered Roller Bearings

Fig 3
Steel Industry
Mining & Construction
Papermaking Machinery
Wind Turbines
Machine Tools
Gearboxes
Pumps & Compressors
Injection Molding Machines
Motorcycles
Railways Rolling Bearings: PP. B110-B181 (487 KB)
To find more titles of our catalogs, please follow the link below.
Downloads (Catalogs and CAD drawings)
You can download the 2D / 3D CAD data of NSK products.

2D/3D CAD Data (PART Community)
This is the free CAD data download service produced by CADENAS WEB2CAD, Inc.
This service can provide designers with 2D and 3D data for mechanical parts.